Vinyl Graphics & Decals Website Superstore! - Performance Decals
 VIDEO PLACEMENT INSTRUCTIONS |
Small Size Stickers |
Normal Size Stickers Decorative |
|
|
Large Size Stickers Decorative
|
Printed Paper Walls Decoration
|
|
|
|
| |
| |
- You will need a ruler, adhesive tape, a clean cloth and window cleaning solution.
- For the best results, the surface must have a temperature of between 15 and 25 degrees centigrade. It must never be over 60 degrees centigrade. Move the vehicle to a place with an appropriate temperature if necessary.
- To obtain the best results, the surface must be clean and ungreased. (If it is not, the sticker may start to come off after a relatively short time).
- All the stickers are designed to be fixed onto the outside of the vehicle.
 |
Step 1
Clean the surface carefully. Rub thoroughly with the cloth and window cleaning solution or methylated spirits to eliminate all the impurities and traces of grease on the surface. |
 |
Step
2
Fix the sticker onto the desired area using adhesive tape, with the backing facing the surface. |
 |
Step
3
Step 3Turn the sticker upwards and remove the backing, thus uncovering the sticker. |
 |
Step
4
Apply the sticker to the surface carefully without letting wrinkles form. |
 |
Step
5
Press down firmly and uniformly on the sticker from the centre out (you can use a credit card to do this) to get rid of any air bubbles. |
 |
Step
6
Wait for a few minutes, then remove the transporting tape leaving the drawing on the surface. If the drawing still sticks to the transporting tape, stick this on the surface again, repeat step 5 and wait 24 hours before removing the transporting tape. |
 |
The result
Here is an example of what it usually turns out like on completing the process |
|
|
|
